Equipment engineered around one goal :
reduce cycle time.
AC850 UV LED LAMP
The last UV lamp your shop will ever need
Most UV lamps in collision shops are underpowered and poorly matched to ultraviolet chemistry. This means a tech needs to hold a UV lamp for several minutes or cumbersome clunky stands must be built to ensure curing.
This is a recipe for failure.
SOCUR and IST (an industrial UV light manufacturer in UK) teamed up to build the AREA CURE850 or AC850.
Matched perfectly to our coatings and delivering the POWER of an industrial UV lamp; now all SOCUR UV primers and fillers are cured in less than a second.
No standing around. Large enough for area repairs. Just work on the car until its done.
COMPARISON TABLE
Standard UV lamps include brands such as Hedson, IRT, SpectraTek, TeslaCure, ScanGrip, Colad etc
CirqualiQ™ raw plastic surface treatment
Assembly line technology...
The first of it's kind for automotive refinish, the CIRQUALiQ® is a surface treatment system for raw plastic parts.
Using the same low flame technology used to prep plastic on the assembly line, two passes of the CIRQUALiQ® eliminates the need for raw plastic prep. No more sanding and plastic adhesion promoter required. A typical 45 minute labor intensive process reduced to under 5 minutes. Scaled down from OE manufacturing for the auto body shop.
Set up is simple. All that is required is power, compressed air and a propane or natural gas supply.
Better repairs. Faster.™